LED Dimmer 200W 1-10V met glazen touchscreen RF 2.4g

In short

• Suitable for LED lighting with 1-10V dimmable drivers
• 256 levels of smooth dimming without flickering
• 86x86x33 mm (w x h x d) - In-wall dimensions
• Touchscreen cover plate: Scratch-resistant crystal glass
• Phase-cut or leading edge dimming via dip switch
• Compatible with RF 2.4G dimming remote control or Wi-Fi relay
• Protected against overheating & overload
• Dimming range: 0 - 100%
• RF control range: 30m
• Environmentally friendly and recyclable materials
• 2-year warranty

Dimming LED lighting 1-10V

This LED dimmer is made of high quality and offers protection against peak voltages and interference signals. This also ensures optimal dimmability and light stability.

What is 1-10V dimming?

1-10V dimming is a way to dim LED lighting. With 1-10V dimming, an alternating current signal of 1 to 10 volts is used to control the brightness of LED lamps.

How does 1-10V dimming work?

A 1-10V dimmer contains a transformer that converts the alternating current signal from the mains into an alternating current signal of 1 to 10 volts. This signal is then sent to the LED lamps. The LED lamps use this signal to control the brightness.

Advantages of 1-10V dimming

1-10V dimming offers a number of advantages over other dimming techniques:

• High light quality: 1-10V dimming provides high light quality, without flickering or other unwanted effects.
• Long lifespan: 1-10V dimming has a long lifespan, as it does not stress the LED lamps.
• Flexible: 1-10V dimming is flexible, as it can be used with different types of LED lamps.

Operating the LED dimmer

The dimmer has a touch glass panel with an ultra-sensitive touch slider and backlighting. With the slider, you can gradually dim or brighten the lighting up to 100%. The panel is made of strong glass and has a modern look.

The dimmer is equipped with 256 levels of smooth dimming without flickering. This means that you can adjust the lighting very accurately. You can use the dimmer to create a cozy atmosphere or to adapt the lighting to the occasion.

Compatible with RF 2.4G dimming remote control

The dimmer is compatible with RF 2.4G dimming remote control or Wi-Fi relay. This allows you to also operate the dimmer from another room.

With the RF 2.4G dimming remote control, you can operate the dimmer wirelessly from any room in your home or business. The remote control has a range of 30 meters, so you can even operate the lighting from the garden or balcony.

With the Wi-Fi relay, you can operate the dimmer with your smartphone or tablet via a smart lighting app. You can then control the lighting remotely, even if you are not at home.

These features make the dimmer very flexible and user-friendly. You can control the lighting anytime and anywhere, so you can always create the perfect atmosphere.

Protection against overheating and overload

The dimmer is equipped with overheating/overload protection. This means that the dimmer will automatically turn itself off if it gets too hot or if too much current is drawn.

This protection offers the following advantages:

• Safety: The dimmer prevents it from overheating or short-circuiting. This protects your lighting and your home from damage.
• Reliability: The dimmer is less susceptible to interference and therefore works more reliably.
• Convenience: You don't have to worry about overheating or overload. The dimmer takes care of itself to keep it running safely.

Installing the LED touch dimmer 1-10V

The connecting wires of a 1-10V dimmer are usually colored:

• Line wire: This wire is connected to the light source.
• Load wire: This wire is connected to the switch.

The line wire must be connected to the connecting terminals of the 1-10V dimmer labeled "L" or "Line". The load wire must be connected to the connecting terminals of the 1-10V dimmer labeled "W" or "Load".

To pair your Touch Dimmer Switch with your devices, follow these steps:

• Turn off the controller.
• Turn on the controller.
• Within 3 seconds, press the on/off button (to control 1 zone) or the zone button 3 times (for multiple zones).
• If the light flashes 3 times, the pairing is successful.

To unpair the controller, follow these steps:

• Turn off the controller.
• Turn on the controller.
• Within 3 seconds, press the on/off button (for control of 1 zone) or the zone button 5 times (for multiple zones).
• If the light flashes 5 times, all pairings have been successfully cleared.

The LED dimmer can also be used for traditional and halogen lighting.